General Infomation of CCEC KTA19-P700 Pump Engine
|
Engine Model |
KTA19-P700 |
Emission Standard |
N/A |
Maxi. Rating |
522 kW (700 HP) @ 1800 RPM |
Peak Torque |
3223 N.m @ 1400 RPM |
Curve & Datasheet |
C-437 |
Displacement |
1150 in3 / 18.9 L |
Compression Ratio |
13.9 : 1 |
Bore*Storke |
6.25 in * 6.25 in / 159 mm * 159 mm |
Type |
4 Cycle , In-line , 6 Cylinder |
Dry Weight (Fan Hub to Flywheel Engine) |
3600 lb / 1633 kg |
Fuel System |
CMS PT |
Wet Weight(Fan Hub to Flywheel Engine) |
3745 lb / 1699 kg |
Aspiration |
Turbocharged & Water-Air Intercooler |
Moment of Inertia of Rotating Components (Excluding Flywheel) |
43.2 lbm.ft2 / 1.82 kg.m2 |
Packing Size(L*W*H) |
2142 mm * 1067 mm * 1733 mm |
C.G. Distance From Rear Face of Block (Engine Only) |
22.5 in / 572 mm |
Configuration |
D193029CX02 |
C.G. Distance Above Crank Centerline (Engine Only) |
9.4 in / 239 mm |
CPL Code Revision |
1457 |
Maximum Allowable Bending Moment at Rear Face of Block |
1000 lb.ft / 1356 N.m |
Firing Order |
1-5-3-6-2-4 |
Moment of Inertia About Roll Axis |
1876 lb.ft2 / 79 kg·m2 |
|
Performance Data of CCEC KTA19-P700 Pump Engine
|
Idle |
675 RPM |
Crankshaft Thrust Bearing Load — Maximum Continuous |
750 lb / 3336 N |
Maximum No-Load Governed Speed |
2100 RPM |
Maximum Allowable Power From Front of Crankshaft |
N/A |
Crankshaft Thrust Bearing Load — Maximum Intermittent |
1500 lb / 6672 N |
Maximum Allowable Power From Accessory Drive |
8 HP / 6 kW |
The above is general technicial information of Cummins KTA19-P700 Pump Engine. It is also for us to supply the Cummins KTA19-P700 genuine parts and KTA19-P700 engine units with water pump(Fire pump)
Cummins Construction Engine,Cummins Marine Engine,Cummins Pump Drive Engine,Cummins Generator Drive Engine,Cummins Automotive Engine,Cummins Power Generation,Cummins Engine Parts