24-Valve Cylinder Head for increased air flow, improved low-end torque and response, higher power density, improved fuel consumption and improved emissions.
Centered Injection System is centered over piston for improved combustion and emissions.
Higher ring locations eliminates airspace in the combustion chamber for better combustion and lower emissions.
More than 10% engines, life-to-overhaul exceed 800,000KM.
Meet Euro Ⅲ emission regulations.
Cummins L290-20 Engine for vehicle
| General data of Cummins L290-20 Engine for vehicle | |
| Engine Model | Cummins L290-20 |
| Type | 6 cylinder in line |
| Displacement | 8.9 L |
| Bore&Stroke | 114*145 mm |
| Net Weight | 680 KG |
| Noise Level | 94 dB(A) |
| B10 Lifetime(km) | 500, 000 |
| Dimension(L*W*H) | 1149*799*1022(mm) |
| Technical data of Cummins L290-20 Diesel Engine for vehicle | |
| Emission Standard | EURO II |
| Aspiration | Turbocharged and Charge Air Cooled |
| Cooling System | Water cooling, |
| Fuel System | Bosch P7100 Pump |
| Maximum low idle speed | 800 RPM |
| Minimum low idle speed | 700 RPM |
| Maximum overspeed capability | 3500 RPM |
| Clutch engagement torque at 800rpm | 760 N-m |
| Maximum altitude for continuous operation without derate | 2200 m |
| Compression ratio | 16.0:1 |
| Performance Date of Cummins L290-20 Engine for vehicle | |
| Rated Output | 213KW |
| Rated Speed | 2000RPM |
| Max Torque/Speed | 1140N.m @ 1400 rpm |
| Minimum Fuel Consumption | 205 g/KW.h |
| Max No loading speed | 2500 RPM |
The above is general technicial information of Cummins L290-20 engine for vehicle application Engine. It is also for us to supply the Cummins L290-20 genuine engine parts.
Cummins Construction Engine,Cummins Marine Engine,Cummins Pump Drive Engine,Cummins Generator Drive Engine,Cummins Automotive Engine,Cummins Power Generation,Cummins Engine Parts
Cummins Construction Engine,Cummins Marine Engine,Cummins Pump Drive Engine,Cummins Generator Drive Engine,Cummins Automotive Engine,Cummins Power Generation,Cummins Engine PartsXML
